BYD M6, Руководство пользователя

Страница: 167 / 227

BYD M6 AUTO Owner’s Manual
Emergency Handling 5-3
NOTICE
y
Don’t start the engine by towing
or pushing the vehicle. This may
cause collision or damage to the
vehicle when the engine starts,
and the three-way catalytic
converter may get overheated,
even leading to a fire.
If the engine rotates normally but
cannot start
1. Turn the ignition switch to ACC or
OFF, and try to start the engine
again.
2. If the engine still cannot start, oil
leak may occur in the engine due
to the repeated starting attempts.
For details, refer to “(c) Engine
Starting with Oil Leak”.
3. If the engine still cannot be started,
your vehicle needs to be serviced
or adjusted. Contact a BYD
service station for help.
(b) Emergency Engine Starting
If the starter system and Start button
function normally, but the engine
cannot be started, try the procedure
below to start the engine:
1. Set the transmission into P gear.
2. Press the Start button and set the
ignition switch to ACC.
3. Press the Start button for some 15
seconds, and meanwhile firmly
step down on the brake pedal and
hold it down.
Even if you can start the engine by
this procedure, the starting system
may have fault. Contact a BYD
service station to check your vehicle.
CAUTION
y
Don’t place any article near the
ignition switch. It may push the
switch accidentally and cause
unexpected engine starting.
(c) Engine Starting with Oil Leak
Repeated starting attempts may
cause oil leak in the engine, resulting
in starting failure.
In this case, fully press down the
brake pedal and accelerator pedal
and, at the same time, press and hold
the Start button for 15 seconds.
Release the accelerator pedal and
start the engine again.
If the starting attempt fails, wait for
minutes and try again.
If the engine still cannot be started,
your vehicle needs to be serviced or
adjusted. Contact a BYD service
station for help.
NOTICE
y
Each starting attempt must be
less than 30 seconds, otherwise
the engine and wiring system
may get overheated.