BYD M6, Руководство пользователя

Страница: 174 / 227

BYD M6 AUTO Owner’s Manual
Emergency Handling 5-10
3. Loosen wheel nuts
Loosen all the wheel nuts.
Loosen all the wheel nuts before
raising the vehicle.
Turn the wheel nuts anticlockwise to
loosen them. To get the maximum
torque, fit the wrench to the nut so
that the handle is on the right side.
Hold the wrench near the end of the
handle and pull it up. Be careful that
the wrench does not slip off the nut.
Do not remove the nuts yet; just
unscrew them by one and a half turn.
CAUTION
y
Never use oil or grease on the
bolts or nuts. Otherwise the nuts
may become loose and allow the
wheels to fall off, which may
cause a severe accident.
4. Locate the jack
Position the jack at the correct jack
point as shown in the figure above.
Make sure the jack is placed on a
level and solid ground.
5. Raise the vehicle
Make sure no one is in the vehicle,
and then raise it high enough to
remove and change the flat tire.
Remember you will need more
ground clearance when installing the
spare tire than when removing the flat
tire.
To raise the vehicle, insert the jack
handle into the jack (it is a loose fitting)
and turn the handle clockwise. As the
jack touches the vehicle and begins to
lift it up, double check that the jack is