BYD M6, Руководство пользователя

Страница: 168 / 227

BYD M6 AUTO Owner’s Manual
Emergency Handling 5-4
(d) Jump Starting
If you do not follow the correct
procedure, jump stating may cause
explosion of the battery, corrosion
from the sulfuric acid, fire and
damage to the electric components
and severe damage to the vehicle.
If you need more information about
the correct procedure, you are
strongly recommended to get help
from a BYD service station.
CAUTION
y
The battery contains toxic and
corrosive sulfuric acid. Wear
safety glasses when jump
starting, and avoid spilling acid
on your skin, clothing or vehicle.
y If you get acid on your body or in
your eyes, remove any
contaminated clothing and flush
the affected area with water
immediately, then get immediate
medical treatment. If possible,
continue to apply water with a
sponge or cloth to the affected
area while on the way to the
hospital.
y
The gas normally produced by a
battery will explode if a flame or
spark is brought near. Use only
standard jumper cables and do
not smoke or light a match while
jump starting.
NOTICE
y
The battery used for boosting
must be 12V. Make sure the
booster battery is correct before
jump starting.
Jump Starting Procedure
1. If the booster battery is installed in
another vehicle, make sure the
vehicles are not touching. Turn off
all unnecessary lights and
accessories.
The booster battery must be
equivalent to have higher rating
than the depleted battery.
If the jump starting fails, charge
the booster battery for a few
minutes and try again.
2. If required, remove all the vent
plugs from the booster and
discharged batteries. Lay a piece
of cloth over the open vents on the
batteries. (This helps reduce the
risks of explosion hazard, personal
injuries and burns.)