BYD M6 Скачать руководство пользователя страница 195

Страница: 195 / 227

BYD M6 AUTO Owner’s Manual

Part Maintenance 7-5

Jacking Points

It is prohibited to place the jack at the
locations indicated by

in the figure

above.

Front – suspension crossbeam

Rear – bottom plate

Position the jack at the locations
indicated by

in the figure above.

CAUTION

When jacking, be sure to following
the instructions below to reduce the
possibility of severe injury or even
death:

Follow the manufacturer’s
instructions on using the jack.

Don’t put any part of your body

under the vehicle supported by
the jack. Otherwise, personal
injury may occur.

Don’t start or run the engine

while the vehicle is supported by
the jack.

Stop the vehicle on a level and

solid ground, firmly set the
parking brake and put the
transmission in “P” (automatic)
or N (manual) gear. If necessary,
block both the front and rear of
the wheel that is diagonally
opposite from the jack position.

Make sure to locate the jack

properly at the jack point.

Raising the vehicle with an
improperly positioned jack may
damage the vehicle or allow the
vehicle to fall off the jack and
cause personal injury.

Never get under the vehicle

when it is supported by the jack
alone. If you have to do so,
always support the vehicle with
safety stands.

Don't raise the vehicle with

someone in it.

When raising the vehicle, do not

place any objects on top of or
underneath the jack.

NOTICE

An improperly positioned jack

will cause damage to the
vehicle.

DO NOT LIFT

Front

Содержание M6




































































































































































































































Результаты поиска

Содержание M6

Отзывы:

Похожие инструкции для M6

Бренды по названию

Популярные бренды

BYD M6, Руководство пользователя

Результаты поиска

Содержание M6

Отзывы:

Похожие инструкции для M6

Бренды по названию

Популярные бренды