Burkert FLOWave S 8098, Руководство по эксплуатации

Страница: 9 / 192

9
Type 8098
13.9.5 Deactivating the monitoring of the acoustic transmission factor .............................113
13.9.6 Resetting the default values of the error limits, the warning limits and the hystere-
sis of the acoustic transmission factor .................................................................................. 113
13.9.7 Resetting the default values of all the acoustic transmission factor parameters .....114
13.10
Diagnostics: monitoring special events in the process, on the sensor or on the electronics ....
114
13.10.1 Enabling the diagnostics for special events in the process .....................................118
13.10.2 Disabling the diagnostics for special events in the process .....................................119
13.10.3 Enabling the diagnostics for special events on the electronics ................................119
13.10.4 Disabling the diagnostics for special events on the electronics ...............................120
13.10.5 Enabling the diagnostics for special events on the sensor ......................................120
13.10.6 Disabling the diagnostics for special events on the sensor .....................................121
13.11 Getting as accurate measurements of the volume flow rate or the liquid velocity as possible .
122
13.11.1 Activating the viscosity compensation for water like liquids ....................................123
13.11.2 Activating the compensation for a liquid with a constant viscosity ..........................123
13.11.3 Activating the compensation for a liquid with a linear viscosity compensati-
on curve ....................................................................................................................124
13.11.4 Activating the compensation for a liquid with a quadratic viscosity compen-
sation curve ..............................................................................................................125
13.11.5 Activating the compensation for a liquid with an inverse quadratic viscosity
compensation curve .................................................................................................126
13.11.6 Resetting the default values of the viscosity compensation parameters .................126
13.12
Setting the refresh time ...........................................................................................................127
13.12.1 Use case of the refresh time .....................................................................................127
13.12.2 Changing the refresh time ........................................................................................127
14
SAW SENSOR - DIAGNOSTICS .........................................................................................................128
14.1
Reading out the generated events related to the device .......................................................128
14.2
Reading out the flow direction that has been set ..................................................................128
14.3
Reading out the temperatures of the electronic boards and of the liquid ............................128
14.4
Reading out the refresh time that has been set .....................................................................129
14.5
Reading out the operating hours of the device ......................................................................129
14.6
Reading out the operating hours of the measurement board ................................................129
14.7
Reading out the diagnostics related to the output values .....................................................130
14.8
Reading out the diagnostics events that occurred in the process ........................................130
14.9
Reading out the diagnostics events that occurred on the electronics .................................130
English