151
Outputs - Parameter
Type 8098
16
OUTPUTS - PARAMETER
Chapter only valid for variants with outputs.
The output parameters can be set with the
Installer
user level.
16.1
Default settings
You can find the default settings of the device in the CANopen supplement for the Type 8098 at
www.burkert.com
→
Before making any change in the settings, use the Bürkert Communicator software to print a pdf file with
all the default settings of the device.
16.2
Changing the type of an output
By default, the outputs are configured as an analogue output. It can be configured as a digital output.
By default settings, the outputs are configured as follows:
Output
Configuration
Designation Internal designation (Communicator)
Mode
Output 1
Digital
DO1
Output 2 (connected to first output)
Flow (Pulse)
Output 2
Analogue
AO2
Output 3 (connected to second output)
Temperature
Possible configurations of the outputs:
Output
Configuration
Designation Internal designation (Communicator)
Output 1
Digital
DO1
Output 2 (connected to first output)
Analogue
AO1
Output 1
Output 2
Analogue
AO2
Output 3 (connected to second output)
Digital
DO2
Output 3 (connected to second output)
To change the type of the output, do the following:
→
Select the device in the navigation area.
→
Outputs
→
Parameter
→
Output x type
→
Select the type of the output.
The type of the output is changed.
English
