159
Outputs - Parameter
Type 8098
If the high threshold is equal to the low threshold, the digital output is deactivated.
→
Set the value of the high threshold
→
Set the value of the low threshold
→
Select to invert the switching or not
→
Set the value of the switching time delay
The new settings are displayed.
→
Finish
The digital output is configured to switch depending on 2 threshold values.
16.5.3
Configuring a digital output as a frequency output
A frequency output transmits a frequency signal which is proportional to the chosen process value.
To configure a digital output as a frequency output, do the following:
→
Select the device in the navigation area.
→
Outputs
→
Parameter
→
Output 2:digital
or
Output 3:digital
→
Mode
→
Select
Frequency
→
Settings
The current settings are displayed.
→
Select the process value associated to the digital output
If the high value is equal to the low value, the digital output is deactivated.
→
Set the high value of the frequency range
→
Set the process value which is associated to the high value of the frequency range
→
Set the low value of the frequency range
→
Set the process value which is associated to the low value of the frequency range
The new settings are displayed.
→
Finish
The digital output is configured as a frequency output.
English
