26
Technical data
Type 8098
6.3.3
EHEDG certification
•
EL class I
• The following versions are EHEDG certified:
Process connections
Diameters
Clamp
2)
connections according to ASME BPE
(DIN 32676 series C)
3/8'', 1/2'', 3/4'', 1'', 1 1/2'', 2''
Clamp connections according to DIN 11864-3 series C
1/2'', 3/4'', 1'', 1 1/2'', 2''
Flange connections according to DIN 11864-2 series C
1/2'', 3/4'', 1'', 1 1/2'', 2''
Clamp
2)
connections according to DIN 32676 series B
DN08, DN15 (except variants with a clamp
diameter of 34.0 mm) DN25, DN40, DN50
Clamp
2)
connections according to DIN 32676 series A
DN08, DN15, DN25, DN40, DN50
Clamp connections according to DIN 11864-3 series A,
DIN 11864-3 series B
DN08, DN15, DN25, DN40, DN50
Clamp
2)
connections according to SMS 3017 / ISO 2852 for
pipes according to SMS 3008
DN25, DN40, DN50
Flange connections according to DIN 11864-2 series A,
DIN 11864-2 series B
DN08, DN15, DN25, DN40, DN50
Table 4:
EHEDG certification
→
To make sure you use EHEDG-compliant gaskets, refer to the "EHEDG Position Paper" available on the
EHEDG website.
The manufacturer of the device does not supply any gaskets for the process connections.
2)
The EHEDG compliance is only valid if used in combination with EHEDG-compliant gaskets from Combifit Interna-
tional B.V.
English
