manualshive.com logo in svg

Buffalo TeraStation WSS 5000, Руководство пользователя, Страница: 98 / 229

Поделиться
Скачать
Buffalo TeraStation WSS 5000 Скачать руководство пользователя страница 98

97

Connecting to the network at LAN port 1 and setting failover at LAN port 1

With the first setup, if the main TeraStation fails, the backup TeraStation will replace it completely, using the same 
name and IP address. The backup TeraStation is updated over normal network traffic.

Connecting to the network at LAN port 1 and setting failover at LAN port 2

With the second setup, the backup TeraStation and main TeraStation are connected by a second Ethernet cable 
connecting their LAN 2 ports. Updating is done over this dedicated network path, so updates are quicker and don't 
interfere with normal network traffic. With this setup, if the main TeraStation fails, the backup TeraStation will replace 
it by name, but will keep its original IP address.

Check if the main TeraStation is alive using LAN port 1 and back up data via LAN port 2

• 

Select LAN port 1 for the backup target and LAN port 2 for the backup LAN port.

• 

This is more efficient than the setup below and doesn't interfere with normal network traffic.

Check if the main TeraStation is alive and back up the data via LAN port 2

• 

Select LAN port 2 for the backup target and for the backup LAN port.

• 

This is fault-tolerant if network disconnections occur.

The main and backup TeraStations should be the same model and capacity. Use fixed IP addresses for both 
TeraStations. Because the IP address of the TeraStation designated as the backup cannot be changed, set its IP 
address before configuring failover.

Содержание TeraStation WSS 5000






































































































































































































































Отзывы:

Нет отзывов