manualshive.com logo in svg

Buffalo TeraStation WSS 5000, Руководство пользователя, Страница: 221 / 229

Поделиться
Скачать
Buffalo TeraStation WSS 5000 Скачать руководство пользователя страница 221

220

LCD Message

Description

Corrective Action

UPS E10
Dependent Mode

The TeraStation is running on the UPS 
battery due to a power outage. The 
system will now be shut down safely.

Check that power is being supplied to the 
UPS, and if there are no problems, turn on 
the TeraStation.

SYSTEM Error E11
Fan Failure

An error occurred in the fan speed.

Check that no foreign objects or dust are 
clogging the fan. If any foreign objects or 
dust are found, use a pair of tweezers, air 
duster, or other tool to remove them. If the 
error is displayed again, contact Buffalo 
technical support for assistance.

SYSTEM Error E12
Cooling Failure

A rise in the system temperature may 
have exceeded the allowable safety value.

Do not place objects in the area around the 
TeraStation. Also, move the TeraStation to a 
cool location.

RAID Arrayx E14
Can't Mount

RAID array x cannot be mounted.

Run the RAID array disk check in Settings.

HDx Error E16
HDx Not Found

Unable to find hard drive x.

Hard drive x may be disconnected or may 
have failed. After shutting down, reinstall 
the hard drive.

HDx Error E22
HDx Can't Mount

Unable to mount drive x.

Format the hard drive. After formatting, 
if the error still appears after rebooting, 
replace the hard drive. If the error is 
displayed again, contact Buffalo technical 
support for assistance.

FailOver E27
LostBackupTarget

Unable to find the backup TeraStation.

In the main TeraStation's settings, navigate 
to 

Backup

 - 

Failover

 to reconfigure the 

backup TeraStation for failover.

HDx Broken E30
Replace the DISK

An error occurred, so hard drive x was 
removed from the RAID array.

Replace hard drive x.

Status

After you change settings or format a hard drive, the current status is displayed on the LCD.

LCD Message

Description

Corrective Action

SYSTEM I10
TOO HOT !

System temperature is too high.

Move the TeraStation to a cool location. Do 
not place objects in the area around the 
TeraStation.

HDx Warning I11
Bad Sectors

Drive x has too many bad sectors.

Replace hard drive x.

Operation I12
DEGRADE MODE

Operating in degraded mode.

-

RAID I13
ARRAYxFormatting

Formatting RAID array x.

-

RAID I14
ARRAYx Checking

Checking RAID array x.

-

RAID I15
ARRAYx Scanning

Examining the error status of RAID array 
x.

Note: 

Transfer speeds are slower during 

the examination process.

-

RAID I16
ARRAYx Creating

Creating RAID array x.

-

RAID I17
ARRAYx Resyncing

Resynchronizing RAID array x.

Note: 

Transfer speeds are slower during 

resynchronization.

-

Содержание TeraStation WSS 5000






































































































































































































































Отзывы:

Нет отзывов