Buffalo TeraStation WSS 5000 Скачать руководство пользователя страница 12

Страница: 12 / 229

To power on, connect the power cable and wait for 10 seconds, then press the power button. To power off,
press the power button twice.

Info LED

If there is a status message, the amber info LED will light up. Check the LCD panel to see the status message.

Error LED

If there is an error, the red error LED will light up. Check the LCD panel to see the error message.

LAN1 LED

When LAN port 1 is connected, this LED glows green. It blinks when the connection is active.

LAN2 LED

When LAN port 2 is connected, this LED glows green. It blinks when the connection is active.

LCD Panel

This display shows the status of many TeraStation settings. It also displays errors and messages when available.

Display Button

Switches between the different display modes. Also, if the TeraStation is beeping, press this button to stop it.

Function Button

Use this button for Direct Copy, dismounting USB devices, rebuilding RAID arrays, and configuring failover.

Drive Lock

Open the front panel with the key to replace hard drives or access the reset button.

Reset Button

To shut down and reboot the TeraStation, hold down the reset button.

Status LEDs

Normally, these LEDs blink green when hard drives are accessed. If a drive fails, its LED will turn red or amber.

Factory Use Only

Boot Mode Switch

Leave the switch in the HDD position during normal operation. To recover settings, insert the recovery USB
drive into a USB 2.0 port, move the boot switch to the USB position, and press the power button.

UPS Port

Connect to a UPS.

USB 3.0 Port

Compatible Buffalo USB 3.0 hard drives can be connected. USB hubs are not supported.

USB 2.0 Port

Compatible Buffalo USB hard drives, USB flash drives, digital cameras, and USB UPS connections can be
connected. USB hubs are not supported.

LAN Port 1

Use an Ethernet cable to connect this port to your network.

LAN Port 2

Содержание TeraStation WSS 5000






































































































































































































































Результаты поиска

Содержание TeraStation WSS 5000

Отзывы:

Похожие инструкции для TeraStation WSS 5000

Бренды по названию

Популярные бренды

Buffalo TeraStation WSS 5000, Руководство пользователя

Результаты поиска

Содержание TeraStation WSS 5000

Отзывы:

Похожие инструкции для TeraStation WSS 5000

Бренды по названию

Популярные бренды