manualshive.com logo in svg

Buffalo TeraStation WSS 5000, Руководство пользователя, Страница: 207 / 229

Поделиться
Скачать
Buffalo TeraStation WSS 5000 Скачать руководство пользователя страница 207

206

Note: 

Make sure the TeraStation's Ethernet frame size is smaller than the hub or router's. Larger frame sizes may 

not transfer the data to the TeraStation correctly.

Changing the IP Address

Normally, the TeraStation's IP address is set automatically from a DHCP server on your network. If you prefer, you can 
set it manually. An easy way to do this is to change it from NAS Navigator2 running on a computer connected to the 
same router (subnet) as the TeraStation. The procedure to change the IP address in Settings is below.

Note: 

If the TeraStation is being used as an iSCSI hard drive, to change the settings, navigate to 

Drives

 - 

iSCSI

 in 

Settings and move the iSCSI switch to the 

 temporarily before changing network settings.

1 

In Settings, click 

Network

.

2 

Click 

 to the right of "IP Address".

3 

Click the LAN port where the IP address will be changed.

Содержание TeraStation WSS 5000






































































































































































































































Отзывы:

Нет отзывов