Buderus Logano plus GB312, Руководство по установке

Страница: 70 / 124

9
Heating system servicing
Logano plus GB312 - Technical specifications are subject to change without prior notice 70
9.11 Servicing and maintenance logs
The inspection and servicing logs can also be used as
copy masters.
V
Initial and date the servicing operations completed.
Service work Page Maximum output Minimum output Maximum output Minimum output
1. Check general condition of heating system
(visual inspection and function check) -
2. Check the gas and water-carrying compo-
nents of the system for:
internal leaks
visible signs of corrosion -
signs of ageing -
3. Check concentration of additives in heating
water (see additive manufacturer’s docu-
mentation and "Water quality requirements
for Logano plus GB312" manual)
Concentration____ % Concentration____ %
4. Check heating system operating pressure 58
5. Check air inlet/outlet vents and flue pipe
connection 44
6. Record readings taken: 49
Flue pressure
____in W.C. ____in W.C. ____in W.C. ____in W.C.
Aggregate flue gas temperature t
A
________ °F ________ °F ________ °F ________ °F
Carbon dioxide content (CO
2
)or oxygen
content (O
2
)
________ %
________ % ________ % ________ %
Determine extent of contamination:
Clean burner and/or heat exchanger as
needed
Carbon monoxide content (CO), without
air
______ ppm
______ ppm _____ ppm ______ ppm
7. Carry out function checks: 51
Check ionization current
________ μA ________ μA ________ μA ________ μA
8. Checking for leaks during operation 52
9. Check that the programming unit settings
are as required (see programming unit docu-
mentation) –
10. Final check of servicing work –
Confirmation of properly completed servicing
Company stamp/Date/Signature