Buderus Logano plus GB312, Руководство по установке

Страница: 65 / 124

9
Heating system servicing
Logano plus GB312 - Technical specifications are subject to change without prior notice 65
Servicing burner electrodes
Checking and adjusting electrode position
V
Measure the distances between the electrodes as
shown in Fig. 64 and adjust as necessary.
V
Undo the screws on the electrode bracket. ( Æ Fig. 65)
V
Adjust the electrode bracket so that the electrodes are
in the position shown in Fig. 64.
V
Tighten the screws on the electrode bracket.
Length
V
Check how far the electrode has burned down, i. e. the
ignition electrode gap.
Fig. 64 Checking electrode position
1 Burner rod
2 Ionization electrode
3 Ignition electrode
Fig. 65 Adjusting the electrode bracket
1 Screw
2 Electrode bracket
A 4 mm Allen key can be used as gauge for
checking the gaps.
1
2
1
7 747 010 720-73.2RS