Breas Medical Vivo 45, Руководство пользователя

Страница: 74 / 226

74 How to Use the Vivo 45
Vivo 45 User Manual
Doc.006149 En Y-2
5.5 Modes in the Vivo 45
In the Modes section of the Vivo 45 display, the operator selects the ven-
tilation mode, breath mode, patient mode and device mode for the treat-
ment.
Standby and Operating Mode
Standby mode is defined as the state of the Vivo 45 when it is powered on
but without having treatment or pre-use test started.
Operating mode is defined as the state of the Vivo 45 when the blower is
operating and producing an air flow.
Switch between operating and standby mode by starting/stopping the
Vivo 45 (see “Switch the Vivo 45 On and Off” on page 43).
Some operations (such as setting time and date) are only available in
standby mode.
Device Mode
The two device modes of the Vivo 45 are used for controlling the user
access to the ventilator settings.
Clinical mode allows full access to the Vivo 45 treatment parameters for
health care professionals.
Home mode is used to limit the access to the ventilator’s settings for
patients and lay persons.
If the Home Adjust function is activated, the patient is given the possibil-
ity to change a selection of patient parameters that is determined by the
responsible care provider. The limited settings for Home Mode are
defined in the Setup section.
Patient Mode
The Vivo 45 can be operated in either Adult mode or Paediatric mode.
In Paediatric mode, some ventilator parameters, for example Breath Rate,
Inspiratory Time and Target Volume have special setting limits, in order
In Home mode, the panel is locked from switching back to Clinical mode
in order to prevent an accidental change of settings.
See “Menu Overview” on page 49 for a chart with settings available in the
Vivo 45’s Clinical Mode and Home Mode.