Breas Medical Vivo 45, Руководство пользователя

Страница: 172 / 226

172 Cleaning and Maintenance
Vivo 45 User Manual
Doc.006149 En Y-2
Patient Circuit
Always clean the patient circuit or use a new patient circuit when the Vivo
is used by a new patient.
Check the patient circuit regularly for damage. In case of damage, replace
the circuit.
7.2 Cleaning and Replacing the Air Filters
Turn off the Vivo 45 and place it on a dust free surface.
The patient circuit should be cleaned and replaced in accordance with the manufac-
turer’s instructions and care provider’s instructions, where applicable.
For safety information, read “Usage of Patient Circuit” on page 17.
Appropriate personnel should determine the duration of use for the
patient circuit based on accepted infection control procedures.
The patient air filters are located in
the filter cassette at the side of the
ventilator.There are two types of
filters:
• Coarse filter (washable, grey)
• Fine filter (disposable, white)
When inserting filters:
1
First Place the filters in the air
inlet compartment, with the
coarse filter outside the fine filter.
2
Close the side panel carefully
for not displacing the filters while
closing. For detailed information
about closing the side panel, see
“Detaching and Reattaching the
Side Panels” on page 30.
1
2