Baroness LM551, Руководство по обслуживанию, Страница: 75 / 213

Important
Use a pressure gauge and hydraulic hose
which can withstand the pressure of 1.4 MPa
(14.3 kgf/cm
2
) (203.1 psi) or more.
Prepare and assemble branched joint 1/2
and adapter 1013-6.
Wrap the adapter with seal tape.
1
2
g2hgdk-007
Charge Circuit_002
1 Branched joint 1/2
2 Adapter 1013-6
Lift up the seat.
Remove the hydraulic hose from the line
filter rear coupling.
3
1
2
zg85f8-048
Charge Circuit_003
1 Line filter rear coupling
2 Hydraulic hose
3 Seat
1.
2.
3.
Install branched joint 1/2 so that it is
inserted between the line filter and
hydraulic hose.
At this time, install it so that the tip of
adapter 1013-6 attached to the branched
joint is toward the right.
1
4
3
2
zg85f8-049
Charge Circuit_004
1 Line filter
2 Hydraulic hose
3 Branched joint 1/2
4 Adapter 1013-6
Important
Be careful when routing the hydraulic hose so
that it is not pinched when lowering the seat.
Install the pressure gauge for extremely low
pressure measurements to adapter 1013-6.
At this time, feeding the hydraulic hose
underneath the frame makes it easier to
view the pressure gauge when taking
measurements.
Secure the pressure gauge to the main
vehicle with string so that it does not fall.
1
2
3
zg85f8-050
Charge Circuit_005
1 Adapter 1013-6
2
Pressure gauge for extremely low
pressure measurements
3 Frame
4.
5.
Hydraulic System
LM551
Hydraulic System
Page 4-37
Measurement