Baroness LM551, Руководство по обслуживанию, Страница: 72 / 213

Important
Use a pressure gauge and hydraulic hose
which can withstand the pressure of 23.0 MPa
(234.5 kgf/cm
2
) (3335.9 psi) or more.
Prepare a UNF90 adjustable elbow
1128-06-04.
1
pizs5v-019
Reverse Traveling (2WD)_002
1 UNF90 adjustable elbow 1128-06-04
Remove the plug from the right side of the
cross-valve located between the left and
right rear wheels with a 1/2 inch hexagon
wrench.
2
1
pizs5v-015
Reverse Traveling (2WD)_003
1 Cross-valve
2 Plug
Install the UNF90 adjustable elbow
1128-06-04 in the location of the plug
removed from the cross-valve.
At this time, install the elbow so that its tip
is toward the rear.
1.
2.
3.
Install a pressure gauge for high pressure
measurements on the UNF90 adjustable
elbow 1128-06-04.
Secure the pressure gauge to the main
vehicle with string so that it does not fall.
2
1
pizs5v-016
Reverse Traveling (2WD)_004
1 UNF90 adjustable elbow 1128-06-04
2
Pressure gauge for high pressure
measurements
Install slings to hooks on the inside of the
left and right front wheels.
2
2
1
1
pizs5v-017
Reverse Traveling (2WD)_005
1 Hook
2 Sling
4.
5.
LM551
Hydraulic System
Page 4-34
Measurement