Baroness LM551, Руководство по обслуживанию, Страница: 161 / 213

LS66
Mower unit #3
After installing the mower stoppers, press
the stopper auxiliary fitting COMP firmly
against the bottom side of the frame and
secure it with the bolts.
1
3
2
A
B
oxie9a-019
Adjustment of Mower Stoppers for Mower Unit #2 and
#3_007
1 Mower stopper
2 Stopper auxiliary fitting COMP
3 Bolt
A Front
B Rear
Adjustment of Mower Stoppers for Mower Unit #4
and #5
The mower stopper is installed to prevent the
mower unit from interfering with the frame.
The attaching position of the mower stopper
for mower unit #4 and #5 differs according to
the type of mower unit.
Install in the appropriate direction.
The relationship between the mower unit type
and the mower stopper attaching position.
LH62
oxie9a-015
Adjustment of Mower Stoppers for Mower Unit #4 and
#5_001
LH52
・
LS62
A
B
oxie9a-016
Adjustment of Mower Stoppers for Mower Unit #4 and
#5_002
A LS62
B LH52
On a level surface, lower all mower units.
Depress the locking pedal while firmly
depressing the brake pedal to lock it.
Stop the engine.
Follow the steps below to adjust the mower
stopper position.
Remove the cotter pin and washer.
Install the roller shaft and rubber roller in
the specified position.
Attach the cotter pin and washer.
3
1
4
2
4
3
oxie9a-006
Adjustment of Mower Stoppers for Mower Unit #4 and
#5_003
1 Rubber roller
2 Roller shaft
3 Cotter pin
4 Washer
LS66
For the mower unit LS66, the adjustment is
not required.
1.
2.
3.
4.
[1]
[2]
[3]
Main Vehicle
LM551
Main Vehicle
Page 6-17
Adjustment