Baroness LM551, Руководство по обслуживанию, Страница: 24 / 213

Stop Ring
Caution
When installing the stop ring to a hole or a
shaft, the stop ring may become disengaged
from the dedicated pliers, fly off, and cause
injury.
Take extra precautions to ensure that the stop
ring does not become disengaged from the
pliers.
Important
When installing the stop ring to a hole or shaft,
do not contract or expand the stop ring more
than necessary.
Excessive contraction or expansion of the
stop ring may cause increased deformation,
which may lead to play and disengagement
from the groove.
1
2
4b82yb-001
Stop Ring_001
1 Stop ring for hole
2 Stop ring for shaft
When installing the stop ring for a shaft,
assemble the stop ring so that the sharp
edge side receives the load (indicated by an
arrow).
1 3
2
4b82yb-002
Stop Ring_002
1.
1 Shaft
2 Stop ring (sharp edge side)
3 Stop ring groove
When installing the stop ring for a hole,
assemble the stop ring so that the sharp
edge side receives the load (indicated by an
arrow).
1
2
3
4b82yb-003
Stop Ring_003
1 Shaft
2 Stop ring (sharp edge side)
3 Stop ring groove
2.
LM551
Maintenance Standards and Maintenance
Page 3-10
General Precautions