Baroness LM551, Руководство по обслуживанию, Страница: 147 / 213

Adjustment of Parking Brake
Caution
Make sure that the brake wire is not cracked
or damaged.
Important
Make sure that the brake is effective on
slopes and that it is not applied any longer
when you release it.
Adjust the parking brake whenever there is
any abnormality.
Stop the engine.
Remove the step cover.
Follow the steps below to adjust the parking
brake.
Depress the locking pedal while firmly
depressing the brake pedal to lock it and
engage the latch in a notch.
3
2
1
A
ulabms-016
Adjustment of Parking Brake_001
1 Brake pedal
2 Latch
3 Notch
A Fourth or fifth notch
1.
2.
3.
[1]
Adjust the adjustment bolt so that the latch
is positioned in the fourth or fifth notch
from the top.
2
1
1
2
3
3
ulabms-013
Adjustment of Parking Brake_002
1 Brake wire
2 Adjustment bolt
3 Lock nut
Adjusting The Neutral Position of The
Piston Pump
Caution
Make sure not to touch rotating tires.
Caution
While adjusting the neutral position, the
machine may start to move.
Securely place jacks beneath the jack-up
points, and then raise the machine until all
tires lift off the ground.
If the machine moves forward or backward
while the traveling pedals are released, they
are not set to the neutral position.
Follow the steps below to make adjustments.
Stop the engine.
Securely place jacks beneath the jack-up
points, and then lift the machine off the
ground.
"Jack-Up Points" (Page 3-18)
Make sure that no tires get contact with the
jack stand.
Open the underseat cover.
Start the engine, and rev it up to the
maximum rpm.
Adjust the neutral position.
Note:
[2]
1.
2.
3.
4.
5.
6.
Main Vehicle
LM551
Main Vehicle
Page 6-3
Adjustment