Baroness LM551, Руководство по обслуживанию, Страница: 158 / 213

1 Coil spring
2 Lift arm
A Light spring load (standard position)
B Heavy spring load
Mower unit #5
22 in mower unit
2
1
B
A
imue1o-001
Adjustment of Mower Unit Leveling Spring_006
1 Coil spring
2 Lift arm
A Light spring load (standard position)
B Heavy spring load
26 in mower unit
2
1
A
B
imue1o-007
Adjustment of Mower Unit Leveling Spring_007
1 Coil spring
2 Lift arm
A Light spring load (standard position)
B Heavy spring load
Adjustment of Mower Stopper
Adjustment of Mower Stoppers for Mower Unit #1
The mower stopper is installed to prevent the
mower unit from interfering with the frame.
The attaching direction of the mower stopper
for mower unit #1 differs according to the type
of mower unit.
Install in the appropriate direction.
Loosen the nuts of the right and left mower
stoppers.
Place the right and left mower stoppers to
the highest position and attach them
temporarily.
On a level surface, raise all mower units.
Depress the locking pedal while firmly
depressing the brake pedal to lock it.
Stop the engine.
Follow the steps below to adjust the
position of the mower stopper.
Loosen the nuts of the right and left
mower stoppers.
Tighten the nuts of the right and left
mower stoppers in a position where the
mower unit is leveled and the mower arm
contacts the center of the mower stopper.
LH62
2 3 4 5
3 4
1
5
6
oxie9a-007
Adjustment of Mower Stoppers for Mower Unit #1_001
1 Mower stopper
2 Bolt
3 Spring washer
4 Washer
5 Nut
6 Washer
1.
2.
3.
4.
5.
6.
[1]
[2]
LM551
Main Vehicle
Page 6-14
Adjustment