Baroness LM551, Руководство по обслуживанию, Страница: 118 / 213

Start the engine and raise/lower the
mower unit, until the distance (A) from the
ground to the grease nipple of the #1
mower connecting fitting is 520.0 mm
(20.47 in).
2
1
A
u2pelw-002
Adjustment of Proximity Switch /#1 Mower_002
1 Grease nipple position
2 #1 mower connecting fitting
A 520 mm (20.47 in)
Stop the engine and move the key switch
to the "ON" position.
Set the traveling/working changeover
switch to "Working" and the reel rotation
switch to "Rotation."
A
B C
D
1
2
u2pelw-003
Adjustment of Proximity Switch /#1 Mower_003
1 Traveling/Working changeover switch
2 Reel rotation switch
A Working
B Traveling
C Rotation
D Stop
3.
4.
5.
Loosen the bolt securing the up/down
sensor mounting plate.
Check that the terminal relay LED
⑤
illuminates when moving the proximity
switch further away from the plastic
magnet.
4
B
A
2
3
1
u2pelw-004
Adjustment of Proximity Switch /#1 Mower_004
1 Up/down sensor mounting plate
2 Proximity switch /#1 mower
3 Bolt
4 Plastic magnet
A Closer
B Further
1
2
3
4
5
6
7
8
#4mower up-down
#5mower up-down
All mowers up-down
#1 #4 #5mower rotation
#2 #3mower rotation
#1 #4 #5mower reverse
#2 #3mower reverse
2
1
u2pelw-005
Adjustment of Proximity Switch /#1 Mower_005
6.
7.
LM551
Electrical System
Page 5-32
About The Electrical Components