![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319090.webp)
76
ImagePRO-II • User’s Guide
4. Menu Orientation
About Transition Effects
Figure 4-62.
Transition Menu
pÉííáåÖ=qê~åëáíáçåë
To set the transition type and timing, use the following procedure:
1.
Select the input you want to transition
from
.
2.
From the
Setup Menu
, select
Transition
. The
Transition Menu
appears.
3.
Set the transition mode by selecting
Trans With,
and scrolling to the type you
want. Press
SEL
.
If you selected
Black Fade
or
Logo
, you can now set the transition time. If you
selected
Image Cut
, you are finished.
4.
For the
Black Fade
and
Logo
modes, scroll to
Trans Time
and press
SEL
.
5.
Select a new transition time and press
SEL
again.
Your settings are saved for this input.
TRANSITION
> Trans With
Blk Fade
Trans Time
1.0
Содержание ImagePRO-II
