![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319068.webp)
54
ImagePRO-II • User’s Guide
4. Menu Orientation
Configuring Outputs
Figure 4-29.
H Pos Adjustment from 0 to 400 pixels
•
V Pos
— After adjusting the
V Size
, you can move the image vertically within the
output’s active vertical limits.The default value is
0
, representing the upper edge of
the active area. Increasing the
V Pos
value moves the image down. Decreasing
the
V Pos
value moves the image up.
Figure 4-30.
V Pos Adjustment from 0 to 200 lines
To set or revert the output Area of Interest, use the following procedure:
1.
From the
Output Menu
, select
Area of Interest
. The
Area of Interest Submenu
appears, showing default settings equal to the H and V actives of the output
timing.
2.
To change the horizontal size of the AOI, select
H Size
and turn the
ADJUST
knob counter-clockwise. Press
SEL
when the image is placed correctly.
3.
To change the vertical size of the AOI, select
V Size
and turn the
ADJUST
knob
counter-clockwise. Press
SEL
when the image is placed correctly.
4.
To change the horizontal position of the AOI, select
H Pos
and turn the turn the
ADJUST
knob counter-clockwise. Press
SEL
when the image is placed correctly.
5.
To change the vertical position of the AOI, select
V Pos
and turn the
ADJUST
knob counter-clockwise. Press
SEL
when the image is placed correctly.
6.
To revert
all
your changes to their default settings, select
Reset
.
HPos / VPos = 0 pixels / 0 lines
H Pos = 400 pixels
V Pos = 0 lines
V Pos = 200 lines
H Pos = 0 pixels
Содержание ImagePRO-II
