![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319082.webp)
68
ImagePRO-II • User’s Guide
4. Menu Orientation
Creating Custom Formats
The
Interlaced
option is either
On
or
Off
. When
Interlaced
is
On
, the
V Total
value is forced to an odd number.
When you press
SEL
to select an option in this list, the navigation cursor changes
to an edit cursor.
4.
Turn the
ADJUST
knob clockwise to increase the value for your option, or
counter-clockwise to decrease the value. When you see the value you want, press
SEL
.
5.
Repeat the previous two steps for the next value you want to change.
p~îáåÖ=~=`ìëíçã=cçêã~í
To save a custom format, use the following procedure:
1.
After you have created a custom format, scroll to
Save As
and press
SEL
. The
Save Format As Submenu
appears.
Figure 4-46.
Save Format As Submenu
2.
With the navigation cursor at the format name field, press
SEL
.
The navigation cursor changes to the edit cursor, and the first character field is
blank with an underscore.
3.
Use the
ADJUST
knob to scroll to the first character you want to use for the
format name, and press
SEL
. The cursor moves to the next character field, which
is now blank with an underscore.
4.
Continue until you have selected all the characters. Your format name can have
up to 19 characters. Press
SEL
after making your final selection.
5.
Press
SEL
again to exit the edit mode. The navigation cursor returns and your
format name appears in the display screen.
6.
Scroll to
Save
and press
SEL
.
If your format name has never been used before, the
Format Saved
message
appears.
Note
You must save the format in order to ensure that it is available
to the system. If you change format values but fail to save the
changes, your custom or edited format will not be stored.
Refer to the
Saving a Custom Format
section on this page
for more information.
SAVE FORMAT AS
> Format1
Save
Содержание ImagePRO-II
