![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319089.webp)
ImagePRO-II • User’s Guide
75
4. Menu Orientation
About Transition Effects
A confirmation message appears. The custom settings assigned to the view are
deleted, and the view is restored to its default values. The preset name of the view
remains in the system.
^Äçìí=qê~åëáíáçå=bÑÑÉÅíë
The ImagePRO-II supports three transition effects that occur when you switch between
inputs:
•
Black Fade
— The selected input’s video fades to black, then the video
transitions to a new input, in a pre-selected timeframe.
•
Image Cut
— The selected input’s video freezes, then the new input’s video is
acquired and cuts to the output display.
•
Logo
— This option is only available when the ImagePRO-II has a stored logo
image. The selected input’s video dissolves to the logo image, then the new
input’s video dissolves in from the logo, in a pre-selected timeframe.
For information about capturing a logo, refer to
Using a Logo or Internal Black
on page 89.
For the
Black Fade
and
Logo
modes, you can set the transition time within a range of
1.0
to
5.0
seconds.
These timings apply only when
In Auto Acquire
is turned
Off
. With
In Auto Acquire
turned
On
, the transition time is slightly greater because of the time required to analyze the
input video timing.
The following figure shows the transition from a video to a logo still frame.
Figure 4-60.
Transitioning to a Logo
The following figure shows the transition from one video through a logo to a second video.
Figure 4-61.
Transitioning through a Logo to a Second Input
There are two options on the
Transition Menu
, as shown in the following figure. The first
sets the transition
type
, and the second sets the
timing
of the transition for
Black Fade
and
Logo
transitions.
Input
LOGO
Transition Time
Input 1
LOGO
Transition Time
Input 2
Содержание ImagePRO-II
