![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319075.webp)
ImagePRO-II • User’s Guide
61
4. Menu Orientation
Configuring Outputs
Figure 4-39.
Full-Color Image and Inverted Effect
If you invert a monochrome image, white becomes black, black becomes white,
dark gray becomes light gray, and light gray becomes dark gray.
Figure 4-40.
Monochrome Image and Inverted Effect
•
Sharpness
— This option sets the sharpness or softness of the output image.
The range is from
-10
(softest) to
+10
(sharpest). The default value is
0
.
•
Flicker Reduce
— Flicker reduction is only available for interlaced video. This
option can range from
+1
(minimum flicker reduction) to
+20
(maximum flicker
reduction, or
Off
(no flicker reduction). The default setting is
12
.
•
Image Flip
— This option changes the position of the content within the active
area. You can flip the image horizontally, vertically, or both.
The following
illustration shows an example of an image within an Area of Interest, flipped
vertically.
Содержание ImagePRO-II
