![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319057.webp)
ImagePRO-II • User’s Guide
43
4. Menu Orientation
Configuring Inputs
pÉííáåÖ=fåéìí=`çäçê=_~ä~åÅÉ
From the
Input Menu
, select
Color Balance
to change contrast, brightness, hue, and
saturation values for the selected input. The
Input Color Balance Submenu
appears. The
values for contrast, brightness, and saturation are in percentages. The values for hue are in
degrees.
Figure 4-13.
Input Color Balance Submenu
•
As with the global
Contrast
and
Brightness
menus, you can adjust both contrast
and brightness within a range of
25%
to
150%
. The default setting for both
contrast and brightness is
100%
.
•
Hue
is measured in degrees. The range is
-90
to
+90
degrees. The default setting
is
0
.
•
Saturation
is a percentage, ranging from
0%
to
150%
. The default setting is
100%
.
•
Reset All
restores all settings to their default values.
^ÇàìëíáåÖ=d~ãã~=
From the
Input Menu
, select
Gamma
to set the input gamma to match the gamma of the
source. The adjustment range is from
1.0
to
3.0
, in 0.1 increments. The default value is
1.0
.
mêçÅÉëëáåÖ=fåíÉêä~ÅÉÇ=~åÇ=cáäã=páÖå~äë
The ImagePRO-II supports working with television and film signals in two ways:
•
By providing the means to
deinterlace
a non-progressive signal for use on fixed-
resolution displays.
~
In
interlaced video
, even lines in a frame are scanned during one field
and odd lines are scanned during the next field. This scanning method
was used in analog television.
Deinterlacing
is the process of converting
the two interlaced fields in a frame to one progressive frame.
~
In
progressive video
, lines in the frame are scanned sequentially. This
is the scanning method used for modern digital displays.
•
By providing the means to detect the 3:2 pulldown sequence for converting film to
video.
These capabilities are found on the
Processing Submenu
. From the
Input Menu
, select
I
NPUT COLOR BALANCE
> Red Contrast
100
Red Brightness
100
Green Contrast
100
Green Brightness
100
Blue Contrast
100
Blue Brightness
100
Hue
+0
Saturation
100
Reset All
Содержание ImagePRO-II
