![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319105.webp)
ImagePRO-II • User’s Guide
91
4. Menu Orientation
Using a Logo or Internal Black
•
Capture Logo
— Scroll to the
Capture Logo
function and press
SEL
to save the
current active image as the logo.
•
Delete Logo
— Scroll to the
Delete Logo
function and press
SEL
to delete the
current logo without removing it completely from memory. If you delete the logo,
the
LOGO
button displays a
black frame
the next time you press it. To completely
remove the logo from memory, use
Erase Logo
on this menu
.
•
Erase Logo
— Completely removes the logo from memory. When security is an
issue, use this option.
•
Backup Logo
— Takes you to the
USB Backup Logo Submenu
to back up the
logo with a flash drive.
•
Restore Logo
— Takes you to the
USB Restore Logo Submenu
to restore a
logo from a flash drive.
For more information about backing up and restoring a logo, refer to
Using a USB
Device
on page 80 of this chapter.
•
Logo Present
— Indicates whether a logo is stored in memory.
To capture a logo using the
Logo Menu
:
1.
Select an input.
2.
From the
Setup Menu
, select
Logo
.
3.
On the
Logo Menu
, select
Capture
.
aáëéä~óáåÖ=~=içÖç
After capturing a logo, you can display it by pressing
LOGO
. The logo transitions to the
output, using the timings you create in
Setting Transitions
on page 76.
When the logo is displayed:
•
The
PAN/ZOOM
button and the
Input Menu
are not available.
•
The
Status Menu
indicates
LOGO
as the input format and shows the resolution of
the captured logo.
If, after capturing a logo, you change the output format, and the logo format is
higher resolution than the output format, the logo appears to be cropped.
Note
When you select an HDCP-capable source (inputs
1, 3,
or
4
),
you cannot save a logo image from that output.
Note
The
Capture Logo,
Delete Logo,
and
Erase Logo
functions
are not available (
n/a
) when the
LOGO
button is selected.
Содержание ImagePRO-II
