![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319184.webp)
170
ImagePRO-II • User’s Guide
`K==réÖê~ÇáåÖ=cáêãï~êÉ
Upgrading Firmware Using the Web Interface
4.
Scroll to the file you want to use, and press
SEL
.
5.
Scroll to
Upgrade
and press
SEL
again.
A progress message appears.
When the file is loaded, the ImagePRO-II powers down and reboots.
réÖê~ÇáåÖ=cáêãï~êÉ=rëáåÖ=íÜÉ=tÉÄ=fåíÉêÑ~ÅÉ=
Before you begin the firmware upgrade, ensure that your PC, laptop, or mobile device uses
one of the following operating systems:
•
Windows
®
XP, Windows
®
Vista™, or Windows
®
7
•
Mac OS
®
X
•
Red Hat
®
Linux
®
You must also know the IP address of your ImagePRO-II unit, which you can find by
selecting
Setup
>
System
>
Ethernet
.
`ÜÉÅâáåÖ=Ñçê=^î~áä~ÄäÉ=cáêãï~êÉ=réÖê~ÇÉë
To determine whether a new version of the ImagePRO-II firmware is available, use the
following procedure:
1.
Verify that the ImagePRO-II has internet access. Contact your system
administrator if necessary.
2.
Select
Setup
>
Firmware Upgrade
>
Web Upgrade
. The submenu shown in the
following illustration appears.
Figure C-4.
Web Firmware Upgrade Submenu
3.
Select
Check
.
A message informs you if a new firmware version is available. To install the latest
version over the internet, refer to the following section,
Automatically Upgrading
Firmware Using the Web Interface
.
If you wish to install a different version, refer to the section of this chapter titled
Selecting a Firmware File to Upload with the Web Interface
on page 171.
If you are not connected to the internet, a message prompts you to check the
connection.
Note
Do not remove the flash drive or power down the
ImagePRO-II until the firmware file is uploaded.
W E B F I R M W A R E U P G R A D E
> C h e c k
> >
V e r i f y i n t e r n e t a c c e s s
b e f o r e c o n t i n u i n g .
Содержание ImagePRO-II
