![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319055.webp)
ImagePRO-II • User’s Guide
41
4. Menu Orientation
Configuring Inputs
Figure 4-10.
Result of Applying a 1:1 Mask to a 5:4 Masked Image
oÉëÉííáåÖ=j~ëâáåÖ=bÑÑÉÅíë
To restore the original image after masking it, use the following procedure:
1.
Select the input that displays the masked image, if it is not already displayed.
2.
On the
Input Menu
, select
Sizing Adjust
.
3.
Scroll to
Reset Mask
and press
SEL
.
All masks are removed, including mask presets.
^ÇàìëíáåÖ=qáãáåÖ=m~ê~ãÉíÉêë
The ImagePRO-II supports adjusting the positioning of the input signal’s active area. There
are two timing adjustment menus:
1:1 Timing Adjust
and
Edge Timing Adjust
.
The
1:1 Timing Adjust Submenu
displays the timing information of the input signal,
shown in the following illustration. Timing parameters are adjustable only when:
•
1:1 Sample
is
On
and
•
The input signal is
analog
YP
b
P
r
or
analog
RGB
Figure 4-11.
1:1 Timing Adjust Submenu (sample)
The options are:
•
Sample Phase
— Initially, the value is set to the default value of
0
.
The range is
-16
to
+15
.
1:1 TIMING ADJUST
> Sample Phase
n/a
H Total
1698
H Position
370
H Active
1280
V Total
1056
V Position
31
V Active
1024
Содержание ImagePRO-II
