![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319065.webp)
ImagePRO-II • User’s Guide
51
4. Menu Orientation
Configuring Outputs
Figure 4-22.
Output EDID Auto Config Menu
On this menu:
•
The
Select Output
line shows the connector from which to read EDID
information. The default value is
DVI
.
•
Auto Config
is a command to read the EDID information of the output device,
determine the preferred resolution, and set the output format to that resolution.
Selecting
Auto Config
changes the output format of the ImagePRO-II to the
output device’s preferred resolution.
•
Status
displays a submenu that tells whether the EDID information has been
read. If it has been read, the submenu also displays the name, status, and
preferred resolution of the display device.
sáÉïáåÖ=lìíéìí=bafa=fåÑçêã~íáçå
To view the EDID information of an output display, follow these steps:
1.
On the
Output EDID Auto Config Menu
, select
Status
.
The
Output EDID Status Menu
appears, as shown in the following illustration. On
this menu, you can read the EDID information for an output you select.
Figure 4-23.
Output EDID Status Menu (sample)
2.
Use
Output
to select an output to read (
DVI
,
HD-15
,
HDMI
,
DP
).
3.
For the output connector you selected, the
Status
field indicates whether the
connector has read the EDID information correctly. Possible status information
includes:
~
n/a
— The EDID information is not available, possibly because no output
device is connected.
~
Checksum Error
— The EDID information is corrupt.
~
OK
— The EDID information is valid.
OUTPUT EDID AUTO CONFIG
> Select Output
DVI
Auto Config
Status
>>
Note
Only the
DVI-D
,
HD-15
,
HDMI
, and
DisplayPort
output
connectors can read EDID information.
OUTPUT EDID STATUS
> Output
HD-15
Status
OK
Name
DELL E172FP
Pref 1280x1024P @60.02
Содержание ImagePRO-II
