![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319107.webp)
ImagePRO-II • User’s Guide
93
4. Menu Orientation
Using a Logo or Internal Black
2.
On the
Logo Menu
, select
Delete Logo
.
bê~ëáåÖ=~=içÖç
Erasing a logo means completely removing it from system memory.
To erase a logo, use the following procedure:
1.
Select
Logo
from the
Setup Menu
.
2.
On the
Logo Menu
, select
Erase Logo
.
aáëéä~óáåÖ=fåíÉêå~ä=_ä~Åâ
The
BLACK
button on the front panel displays a black frame on the output device. The
black frame transitions to the output, using the timings you created in
Setting Transitions
on page 76. If you did not create transition timings and effects, you can do so before you
begin.
When the display transitions to black:
•
The
BLACK
button is lit and the input button is backlit.
•
The
Status Menu
indicates
Internal Black
as the input format.
•
The
PAN/ZOOM
button and the
Input Menu
are not available.
To restore video to the display, press the input button again.
Note
You can also delete a logo by overwriting it with another
image, or by performing a
Factory Reset
.
Before returning an ImagePRO-II from an event, it is
advisable to use this procedure when the security of
your data is critical.
BLACK
Содержание ImagePRO-II
