![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319025.webp)
ImagePRO-II • User’s Guide
11
2. Hardware Orientation
ImagePRO-II Front Panel
fåéìí=_ìííçåë
Input buttons 1 through 5 correspond to the five standard input connectors on the rear
panel. These buttons select the source signal that you want to display.
Figure 2-5.
ImagePRO-II Input Buttons
The sixth button is reserved for an optional input.
•
Press
Input Button 1
to select the source on the
DVI
(digital or universal analog)
connector.
•
Press
Input Button 2
to select the source on the
HD-15
(universal analog)
connector.
•
Press
Input Button 3
to select the source on the
HDMI
connector.
•
Press
Input Button 4
to select the source on the
DisplayPort
connector.
•
Press
Input Button 5
to select the source on the
SDI
-
1
connector.
For details about supported resolutions and HDCP compatibility for each input, refer to the
Input Video Connectors
section on page 13 of this chapter, or to the
Input
Specifications
section of Appendix A, on page 132.
qÜÉ=ildl=_ìííçå
The
LOGO
button beneath the input buttons can serve as an additional image source.
Using
LOGO
, you can capture, import, and store a still output frame in non-volatile
memory, then transition to and from that still frame. For more information about using
LOGO
, refer to the
Using a Logo or Internal Black
section of Chapter 4 on page 89. For
more information about transitioning, refer to the
Setting Transitions
section on page 76.
qÜÉ=_i^`h=_ìííçå
The
BLACK
button transitions the display to and from black. For more information about
BLACK, refer to the
Displaying Internal Black
section of Chapter 4 on page 93.
qÜÉ=cow=_ìííçå
Pressing the
FRZ
button temporarily freezes the displayed video. If
FRZ
is lit, the following
actions turn it off:
•
Pressing
FRZ
again
•
Pressing the input button for the displayed image
When you freeze an image, the
PAN/ZOOM
button is not operational, and the
Input Setup
and
Views
menus are not accessible.
6
SDI-2
2
3
HDMI
5
SDI-1
1
DVI-I
4
DP
2
HD-15
Note
A customer-supplied
DVI to HD-15 adapter
is required to
connect analog video to the DVI connector.
LOGO
BLACK
FRZ
Содержание ImagePRO-II
