![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319129.webp)
ImagePRO-II • User’s Guide
115
5. Web Remote Control Operations
Working with the Home Page
The procedure in all three locations is the same:
To change the input format, use the following procedure:
1.
Select the input from the panel at the top of the page.
2.
Click the down arrow in the
Input Format
field.
3.
In the rotating list that appears, select the format you want. The format changes
immediately for the selected input. For information about using lists, refer to
Rotating Lists
on page 110.
To change the output format, use the following procedure:
1.
Click the down arrow in the
Output Format
field.
2.
In the rotating list that appears, select the format you want. The format changes
immediately for the selected input or output.
içÅâáåÖ=íÜÉ=cêçåí=m~åÉä=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
To lock the front panel from the
Home
page, click and hold down the
Front Panel Lock
button and slide it to the right. When you release the button, the background of the button
turns green to indicate that the lock is active. When the front panel is locked, you can
continue to use the Web App Interface to adjust settings on the ImagePRO-II.
The default setting for
Front Panel Lock
is
Off
.
p~îáåÖ=póëíÉã=pí~íÉ=ïáíÜ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
The
Save System State
button on the
Home
page saves all custom settings that you
create, whether you change them from the Web App Interface or the front panel.
oÉÑêÉëÜáåÖ=íÜÉ=tÉÄ=^éé=fåíÉêÑ~ÅÉ
The
Refresh
button appears on every page of the Web App Interface. This button
refreshes the Web App Interface to update
all
settings you change using the front panel,
even settings that do not apply to the page you are viewing.
qê~åëáíáçåáåÖ=íç=~=içÖç=çê=_ä~Åâ=ïáíÜ=íÜÉ=tÉÄ=^éé=
fåíÉêÑ~ÅÉ
Select
LOGO
to transition to a stored logo. To transition back to the input video, click
LOGO
again.
Select
BLK
to transition to internal black. To transition back to the input video, click
BLK
again.
Note
The
Input Format
and
Output Format
lists do not include
custom formats you may have previously saved to the
ImagePRO-II. To apply a custom format, use the front panel
Input
and
Output
menus.
Note
Settings you change using the front panel are not applied to
the Web App Interface until you click
Refresh
.
Содержание ImagePRO-II
