![background image](http://html1.mh-extra.com/html/barco/imagepro-ii/imagepro-ii_user-manual_3868319059.webp)
ImagePRO-II • User’s Guide
45
4. Menu Orientation
Configuring Inputs
^Äçìí=fåéìí=`çåÑáÖìê~íáçåë
The ImagePRO-II supports saving up to 64 input configuration files in non-volatile memory,
each of which is available to the five physical inputs. Input configuration files contain
settings that can govern everything from pixel resolution to aspect ratio and color balance
— any setting you can view or change using the
Input Menu
.
By default, an input’s configuration file number is the same as the number of the input —
Input 1
is assigned to configuration file number 1, and so on. You can set, delete, recall or
save the configuration file for an input. You can associate any number of saved files to any
number of inputs.
When you change the configuration file for an input, the timing in the new configuration file
must match the input’s timing. For example, if the input uses NTSC (720 x 480) timing, that
input cannot use a configuration file with a WXGA (1280 X 768) resolution.
When you delete user-defined configuration files, those files are no longer available for use
by any input.
For more information about using input configuration files, refer to the following sections:
•
Saving an Input Configuration
•
Resetting an Input Configuration
•
Recalling an Input Configuration
•
Deleting an Input Configuration
p~îáåÖ=~å=fåéìí=`çåÑáÖìê~íáçå
After you use the
Input Menu
to change one or more input settings, you can save the
changes by selecting
Save Config
.
Save Config
saves up to 64 input configurations in
non-volatile memory. You can save the changes to the current configuration file for the
selected input, or to a different file.
To save configuration settings, use the following procedure:
1.
Select the input you wish to configure, and make adjustments.
2.
From the
Input Menu
, select
Save Config
. The
Save Config As
Submenu
appears. The cursor is at the
File1
field.
Figure 4-15.
Save Config As Submenu
3.
Press
SEL
. The navigation cursor changes to the edit cursor. A blank field for the
first character becomes available and this field is marked by an underscore.
SAVE CONFIG AS
> File1
Save Config
Содержание ImagePRO-II
