Accessories
Preparation
1
2
Spacers (2.3 mm) x 4
Adhesive Tape x 1
Washers x 4
Screws x 4 (M2)
Heatsinks
A
x 11
B
x 2
C
x 4
D
x 4
E
x 5
Accelero TWIN TURBO II
Installation Manual
Ensure there is no physical interference
between the heatsinks and the circuit
components as it may cause short
circuit. Use tape to cover the
circuit components when necessary.
Ensure there is no physical interference
between the heatsinks and the circuit
components as it may cause short
circuit. Use tape to cover the
circuit components when necessary.
Spacers (4 mm) x 4
Spacer
Adhesive
Tape
Spacer
Adhesive
Tape
X 4
Protective Film
5
4
Choose the right mounting hole and spacers:
6
Instala
č
ní p
ř
íru
č
ka: www.arctic.ac/fileadmin/att2/manual_cz.pdf
Telepítési kézikönyv: www.arctic.ac/fileadmin/att2/manual_hu.pdf
Instrukcja monta
ż
u: www.arctic.ac/fileadmin/att2/manual_pl.pdf
Installatiehandleiding: www.arctic.ac/fileadmin/att2/manual_nl.pdf
Montageanleitung: www.arctic.ac/fileadmin/att2/manual_de.pdf
Guide d’installation: www.arctic.ac/fileadmin/att2/manual_fr.pdf
Manual de instalación: www.arctic.ac/fileadmin/att2/manual_es.pdf
Manual de Instalação: www.arctic.ac/fileadmin/att2/manual_pt.pdf
Installationsmanual: www.arctic.ac/fileadmin/att2/manual_se.pdf
Remove the mounting plate from the cooler and fix it on top of your VGA card to the position of the
mounting holes. Now you should be able to see the exact position of the mounting plate occupied area to
avoid the interference of the RAM heatsinks and mounting plate.
7
3
Please note this table is for reference only. Refer to your own VGA card holes position during installation.
The updated information is available at att2.arctic.ac.
?
?
43.2 mm - use
43.2 mm - use
53.2 mm - use
53.2 mm - use
51.0 mm - use
51.0 mm - use
58.4 mm - use
58.4 mm - use
Not cleaning circuit components thoroughly
with an
eraser
leads to
no adhesiveness
of the G-1.
8
Must thoroughly mix
the entire amount of
compound of both bags for
5 minutes
.
Not mixing for 5 minutes will lead to no
adhesiveness of the glue.
Application has
to be done within
15 minutes
thereafter.
+
5 mins
4-pin Fan
Power
Adapter
x 1
VGA Bracket
x 1
Mixing Wand
x 1
G-1 (White Compound 2 g)
G-1 (Grey Compound 2 g)
EN
Mounting Hole
Compatible Models
①
①
43.2 mm x 43.2 mm
NVIDIA GeForce:
6600 GT AGP, 6600 GT, 6600 LE, 6600 DDR2, 6600
AMD Radeon:
HD 6770, 4770, 2600 XT, X1650 XT, X1650 Pro, X1600 XT, X1600 Pro,
X1550, X1300 XT, X1300 Pro, X1300
②
②
53.2 mm x 53.2 mm
③
③
51.0 mm x 61.0 mm
NVIDIA GeForce:
GTX 560Ti, GTX 560, GTX 550 Ti, GTX 460 SE, GTX 460
Use Spacers
2.3 mm
2.3 mm
4.0 mm
NVIDIA GeForce:
8800 GTX (G80), 8800 GTS (G80)
4.0 mm
NVIDIA GeForce:
GTS 550, GTS 450, GT 340, GT 330, GT 320, GTS 250,
GTS 240 (OEM), GT 130 (OEM), 9800 GTX+, 9800 GTX, 9800 GT, 9600
GT, 9600 GSO 512, 9600 GSO, 8800 GTS 512 (G92), 8800 GTS (G92),
8800 GT, 8800 GS (9600GSO), 7950 GT,
7900 GTX, 7900 GT, 7900 GS, 7800 GTX 512, 7800 GTX,
7800 GT, 6800 Ultra Extreme, 6800 Ultra, 6800 GT, 6800 GS AGP, 6800
GS, 6800 AGP, 6800, 6800 XT AGP, 6800 XT, 6800 LE
AMD Radeon:
HD 6950, 6870, 6850, 6790, 5870, 5850, 5830, 4890, 4870, 4850, 4830,
3870, 3850, X1950 XTX, X1950 XT, X1950 Pro, X1950 GT, X1900 XTX,
X1900 XT, X1900 GT, X1800 XT, X1800 XL, X1800 GTO
58.4 mm x 58.4 mm
