Copyright 2003
Avaya Inc.
All rights reserved
Printed in U.S.A.
Document Number 518-457-101
Comcode: 700292501
August 2003 (Issue 7)
PARTNER is a registered trademark of Avaya Inc.
PARTNER PC CARD
Installation Instructions
This PC Card is used with a PARTNER
®
Advanced Communications System (ACS). These instructions are
designed for any one of the following types of PC Cards:
■
Backup/Restore Card
■
Software Upgrade Card (for one-time upgrade only)
■
Automatic System Answer/Direct Extension Dialing (ASA/DXD) Card
■
PARTNER
®
Remote Access PC Card
WARNING:
Remove all other PC Cards from the processor before initiating an upgrade.
Important Safety Instructions
WARNING:
The following list provides basic safety precautions that should always be followed when using this product:
1.
Read and understand all instructions.
2.
Follow all warnings and instructions marked on the product.
3.
Do not drop, bend, or crush the card.
4.
Keep the card away from moisture, high temperatures, and direct sunlight.
5.
Keep the connector on the card clean.
CAUTION:
Before starting, verify that you have batteries properly installed in the processor module. Extension 10 will
show
ChgBat W/PowerOn
or
ReplaceSysBat W/Power On
on the display if the batteries need to be
replaced, or if they are not installed properly. To avoid damage to the processor module or to the card, do not
install or remove the card when power is on.
SAVE THESE INSTRUCTIONS
The PARTNER Remote Access PC Card is a multi-purpose card that accompanies all
PARTNER ACS Release 3.0 and later processors. This PC Card can be used to upgrade
previous versions of PARTNER ACS Release 3.0 and later to perform backup and restore
functions. With additional software (for the PC, not the PARTNER system), the PARTNER
Remote Access PC Card can also be used to administer the PARTNER system from local and
remote locations using a PC.
