Barco Event Master E2 Series, Руководство пользователя

Страница: 353 / 584

R5905948 /12 Event Master Devices 353
During the Event Master Toolset installation you are asked to add a driver, be sure to answer yes to
this question in order to use the EC-30 with your host computer. If the driver is not installed the EC-
30 will not work.
11.3 EC-50 controller connection
Prerequisites
Event Master Toolset revision 2.0 or higher must be installed on the Host computer prior to the connection of
the EC-50.
Verify that the Host computer is equipped with the latest software version available on the Barco
web site (URL:
https://www.barco.com/ ). Refer to the chapters “ Download of Event Master Toolset
Software ” , page 105 and “ Software installation ” , page 106 for more information on the software
downloading and how install it on the Host computer.
Connection diagram
Image 11-2: EC-50 connections
Description
Connect the external screen and USB communication from the host computer to the DVI and USB B
connector on the EC-50.
Plug the cord to the power outlet.
Necessary cables are provided in a new system. In the case that the original cables are missing, simply use
standard computer cabling to make these connections.
11.4 EC-200/EC-210 controller connection
Prerequisites
EC-200 is delivered with Event Master Toolset revision 3.0 or higher. EC-210 is delivered with Event Master
Toolset revision 6.0 or higher.
Verify that the EC-200/EC-210 is equipped with the latest software version available on the Barco
web site (URL:
https://www.barco.com/ ). Refer to the chapters “ Download of Event Master Toolset
Software ” , page 105 and “ Software installation ” , page 106 for more information on the software
downloading and how to install it on the controller.
Controller Configuration