ATS SuperTrak GEN3, Руководство по эксплуатации и обслуживанию, Страница: 86 / 366

74 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Installation
Lift a SuperTrak Conveyance Platform Section
This section describes the correct lifting techniques for the following:
• Straight section
See Lift a Straight Section Assembly on page 75.
• 180 deg. section (500 mm)
See Lift a 180 Deg. Section (500 mm) on page 76.
• 180 deg. section (800 mm)
See Lift a 180 Deg. Section (800 mm) on page 77.
• Segments in an over/under configuration
See Lift a 180 Deg. Section (800 mm) on page 77.
Always use appropriate lifting devices and use safe lifting practices when moving a
section. The following tools are required for this procedure:
• Three (3) M8 rotating eye bolts
• Three (3) lifting straps, each with a minimum lifting capacity of 100 kg
(220.5 lb)
• Appropriate lifting device (for example; a forklift or crane)
Always use appropriate lifting devices (for example, a forklift or crane)
and use safe lifting practices and procedures when lifting a straight or
curved section.
ATS recommends that you obtain relevant information from your national
Health and Safety Authority.