Amazone Cirrus 3002 Скачать руководство пользователя страница 111

Страница: 111 / 209

Coupling and uncoupling the machine

7.2

Uncoupling the machine

WARNING

Risk of contusions, cutting, catching, drawing in and knocks
through insufficient stability and possible tilting of the uncou-
pled machine!

Set the empty machine down on a horizontal parking area with a firm

base.

When uncoupling the machine, there must always be enough space

in front of the machine, so that you can align the tractor with the ma-

chine if necessary.

Uncoupling the machine:
1. Align the tractor and machine straight and

park the empty machine on a horizontal

parking surface with a firm base.

2. Retract the integrated running gear (lower

the machine). Here the machine can be

coupled or uncoupled.

3. Press the button (switch off Fig. 108/1)

(AMATRON 3).

4. Apply the tractor parking brake, switch off

the tractor engine and remove the ignition

key.

Fig. 108

5. Release the spring pins (Fig. 109/1) and

remove the 4 wheel chocks from the mount-

ings at the front of the machine.

Fig. 109

Cirrus BAH0049-1 09.14

111

Содержание Cirrus 3002


















































































































































































































Результаты поиска

Содержание Cirrus 3002

Отзывы:

Бренды по названию

Популярные бренды

Amazone Cirrus 3002, Руководство по эксплуатации

Результаты поиска

Содержание Cirrus 3002

Отзывы:

Бренды по названию

Популярные бренды