Alpinestars Tech-Air 10 System, Руководство пользователя

Страница: 12 / 204

25 EN 24 EN
Any body piercings which coincide with the airbag coverage area
should be removed before electing to use the System, as inflation of
the airbag into and against the body piercings may cause discomfort
and/or injury.
The System must not be used by persons with neck or back problems.
The System must not be used by women during pregnancy.
The System must not be used by women with artificial breast
implants.
The System must not be used by persons fitted with a pacemaker or
other implanted electronic medical devices.
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
Allergy Advice
Persons with certain skin allergies to synthetic, rubber or plastic materials, should carefully
monitor their skin each time the System is worn. If any irritation of the skin occurs,
immediately stop wearing the System and seek medical advice and/or attention.
8. Compatible Outer Garment
The Tech-Air® 10 System must be used with a protective outer garment, as the System is
not abrasion resistant. It is recommended that the user chooses a protective outer garment
that, when worn over the Tech-Air® 10 System, does not cause discomfort and does not
prevent the functioning or inflation of the System.
The System can be used with any protective garment that covers the upper body and the
hips and that is designed for a motorcycle, provided that the garment has sufficient space
to allow for the expansion of the airbag after the deployment.
Alpinestars offers many Tech-Air® compatible outer garments (Tech-Air® Compatible 1 and
2 piece suits, and the new generation of Tech-Air® Ready garments), specifically designed
with stretch panels to accommodate the volume of the inflated airbag after deployment.
Even if Tech-Air® Compatible and Tech-Air® Ready Garments are
specifically designed according to certain standard sizing criteria
to be used with Tech-Air® Systems, always try the outer garment
together with the System in order to correctly select the appropriate
fit accordingly to your body size. This will ensure that the outer
garment has the necessary space to accommodate the System in
its inflated state and that the System does not cause discomfort or
prevent the correct functioning of the System when it expands.
WARNING!
Body measure Garment measure
Compatibility with any outer garment
If your outer garment is not Tech-Air® Compatible or Tech-Air® Ready, or in case of any
doubts, follow the procedure described below to check if your outer garment is compatible
with the System. Remember to ensure that you select an outer garment that has the
proper fit and should any protectors be present on such outer garment, that the protectors
are correctly positioned. If the outer garment you have chosen is made of leather or any
different not-stretchable material, it must have stretch panels to accommodate the inflated
airbag after deployment.
Upon inflation, the Tech-Air® 10 System’s airbag covers shoulders, chest, hips and fullback
area, accordingly, the System must not be used inside a leather suit or a 2-piece leather
suit, if such leather suit or 2-piece leather suit has insufficient space to accommodate the
inflation of the airbag or if too tight in the crotch area, in order to prevent discomfort in
case of deployment. From a sizing guidelines perspective, it is important that you wear an
outer garment that will accommodate for the inflation of the airbag.
Here are some guidelines on how to check if your outer garment is compatible with the
Tech-Air® 10 System:
C C
A
A1
B
B1
Figure 9