Alpinestars Tech-Air 10 System, Руководство пользователя

Страница: 23 / 204

47 EN 46 EN
User Registration
To have access to the Tech-Air® App, the user must log in or, if not, sign up. In order to configure
the Tech-Air® App, the user must turn on Bluetooth within the user’s mobile phone settings.
Figure 14
Pair the System
Once the Bluetooth is turned on, the App will automatically attempt to establish a connection
with an available Tech-Air® System, if already paired with the System. Should no Tech-Air®
System have been already paired to the App, the System can be easily paired to the App by
scanning the QR code present on the tag found on the System’ s Activation Belt (4). Once the
System has been correctly paired with the App, it will be possible to visualize the overall status
of the System, such as battery level and installed software, and users will be able to enable or
disable some of the functions provided by the App.
When the Tech-Air® System turns off, the Bluetooth® connection will stay active to allow for the
dialogue between the System and the mobile phone, provided that the System is in the vicinity.
In this case, the active connection with the App is indicated by the blinking yellow light (3b) on
the LED Display (3) and the User can interact with the App. The LED Display (3) will definitively
turn off when the System doesn’t detect any connection with the App.
Figure 15
Monitoring the System Status
The App provides information about the actual operating mode of the System, verifying if
the System is functioning correctly or not. The indication “System On” displayed on the screen
indicates that the System Check has been successfully passed and that the System is active.
While riding, “System On” mode is active and accordingly, for safety reasons, the user cannot
access most of the App functions. In case the System needs to be disabled by the user, such as
during a heavy off-road riding session, the System can be turned off using the slide icon on the
App (as shown in Figure 16). To reactivate, open and close the Activation Belt (4).
In case of deployment, the App will show the relevant status with the wording “SYSTEM
DEPLOYED” as depicted in Figure 16.