Adtech 4 Series, Руководство по обслуживанию

Страница: 81 / 155

ADTECH 4 series CNC System (maintainance Manual)
77
005
X Soft P(mm)
X Soft PosLimit-(mm)
Y Soft P(mm)
Y Soft PosLimit-(mm)
Z Soft P(mm)
Z Soft PosLimit-(mm)
4 Soft P(mm)
4 Soft PosLimit-(mm)
B Soft P(mm)
B Soft PosLimit-(mm)
C Soft P(mm)
C Soft PosLimit-(mm)
Range : 1---9999
，
1---9999
，
1---8000
Unit : mm/min,mm/min,mm/sec
Authority : Operation admin or higher
Default : 3000,200,1500
Effective time : Instant
Note : This parameter is the trapezoid acceleration/deceleration setting and used
for GOO instruction
About start speed, 1-2 rpm motor speed is recommended for step motor;
as above, the machine moves 5mm when the motor rotates one cycle, and
the speed is 5-10mm/sec (300-600mm/min). For servo motor, the start
and stop shouldn‘t have vibration. If this speed is too high, it will cause
vibration during motion, and the step motor will be out of step.
The acceleration and start speed also affect JOG speed, home speed, etc
those speed not for interpolation.;
Range : -9999 --- 9999
ZstartupSpeed(mm/min)
4StartupSpeed(mm/min)
BStartupSpeed(mm/min
CStartupSpeed(mm/min)
X Acceleration(Kpps)
Y Acceleration(Kpps)
Z Acceleration(Kpps)
4 Acceleration(Kpps)
B Acceleration(Kpps)
C Acceleration(Kpps)
004