Adtech 4 Series, Руководство по обслуживанию

Страница: 89 / 155

ADTECH 4 series CNC System (maintainance Manual)
85
023 X Encoder bit(p)
Y Encoder bit(p)
Z Encoder bit(p)
4 Encoder bit(p)
B Encoder bit(p)
C Encoder bit(p)
025 X PulseLogic Level<
●
>
Y PulseLogic Level<
●
>
Z PulseLogic Level<
●
>
4 PulseLogic Level<
●
>
slave . for example ,if dual X axis ,the <X physial Assign Num> is 1 ,then
you can set <4 physial Assign Num > =1 ,that means the x axis is dual
drive ,x axis port is master ,A axis is slave .
If set y axis dual drive ,the <Y physial Assign Num> is 2 , ,then you can
set <4 physial Assign Num > =2 ,that means the Y axis is dual drive ,x
axis port is master ,A axis is slave .
Other axis is similar
Range : 0
～
9999
Unit : P/R
Authority : Operation admin or higher
Default : 2500
Effective time : reboot
Note : Set the servo motor encoder rated P/R ,if the encoder is 2000p/r ,pls set
these parameters 2000
Range : 0/1
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : reboot
Note : These parameters are invalid ,no need set
X Reset to 360
Y Reset to 360
Z Reset to 360
4 Reset to 360
B Reset to 360
C Reset to 360
024