Adtech 4 Series, Руководство по обслуживанию

Страница: 100 / 155

ADTECH 4 series CNC System (maintainance Manual)
96
additional panel enable
M CODE select
024
T code select <
●
>
025 PLC select
Effective time : Instantt
Note : Used to configure whether the key for axis motion on the control panel is
enabled.
If you want to edit macro program ,pls make this parameter enable (on
),then you can input symbles (―[‖,― ]‖
， ― ﹦ ‖ and so on )
Range : 0
～
1
Unit : none
Authority : Super user
Default : off / 0
Effective time : Instantt
Note : Used to set whether controller uses additional panel, which must be ADT
matching additional panel, or compatible with the interface of same
protocol.
If additional panel is used, the sys debug information En must be disable
(P3.020).
Range : M-Func / user _Def
Unit : none
Authority : Super user
Default : M-Func
Effective time : reboot
Note : Used for setting M code
MFUNC: the default m code
User-def: use the m code define by youself
Range : T-Func / user _Def
Unit : none
Authority : Super user
Default : T-Func
Effective time : reboot
Note : Used for setting the ATC function of the controller, which is achieved by
calling T_FUNC.NC or not.
Range : PLC / user _Def
022
023