Adtech 4 Series, Руководство по обслуживанию

Страница: 70 / 155

ADTECH 4 series CNC System (maintainance Manual)
66
012
System Baudrate
013
Controler ID
015
016
G73(M)LoopObligate(mm)
G83(M)LoopObligate(mm)
Note :
While editing G code manually, after this line is finished ,the program
add a line number Nxxxxx automatically in a new line;
0 indicates that this function is disabled;
Range : 9600~115200
Unit : None
Authority : Operation admin or higher
Default : 115200
Effective time : Reboot
Note :
The communication rate setting for connection PC software when the
controller communicate with pc software via RS232
Range : 1~250
Unit : None
Authority : Operation admin or higher
Default : 1
Effective time : Reboot
Note :
The communication rate setting for connection PC software when the
controller communicate with pc software via RS232 or network(RJ45)
Range : 0~1
Unit : mm
Authority : Operation admin or higher
Default : 0.2
Effective time : Instant
Note :
Set the arc interpolation equivalent
If this value is too small, the arc is more better , but the
internal
algorithm is more complicated(as you know ,the Arc G code which
inported from CAM software are composed by lots of small lines) , so
that the controller response speed is slow ,it will take more time to
excute program .the default value is ok .
Range : 0.1~100
Unit : mm
Authority : Operation admin or higher
Default : 2.000
Effective time : Instant
014
Circle InpUnit(mm)