Adtech 4 Series, Руководство по обслуживанию

Страница: 77 / 155

ADTECH 4 series CNC System (maintainance Manual)
73
056 M98 jumpp line En
Authority : Operation admin or higher
Default : Mac coord
Effective time : Instant
Note :
At home mode ,clear the coordinate
at home mode ,press X Y Z A B C ,the axis coordinate wll be flicker ,then
press CAN button ,all axis coordinate will be 0 ,if this setting is Mac
coord ,that means the current coordinate system is machine coordinate
system ; if it is G54 coord,that means the current coordinate system is
G54 coordinate system
Note:this function only for machine debuging
Range : 0
～
20000
Unit : mm/min
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note :
If the P1.044 or P1.045 setting is 1 (enable), when the controller pause
(during working),the A or Z axis will move to the P1.050 and P1.049
setting safty position (this coordinate can be workpiece coordinate or
machine coordinate)
Range : -9999.999
～
9999.999
Unit : mm
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note :
If the P1.044 or P1.045 setting is 1 (enable), when the controller pause
(during working),the A or Z axis will move to the P1.050 and P1.049
setting safty position (this coordinate can be workpiece coordinate or
machine coordinate)
Note These thress parameter for lathe machine ,no need set it
Range : On /Off
Unit :
Authority : Operation admin or higher
Default : Off
Effective time : Instant
Note :
If this setting is on,when excute M98 code ,it will jump to subprogram
Screw Acc pitch p( mm)
Screw slow pitch D( mm)
Screw backvalue V( mm)
053
054
055
Z axis feed speed limit
A axis feed speed limit
051
052
Pro RZ to reference pos
Mac RZ to reference pos
049
050