Adtech 4 Series, Руководство по обслуживанию

Страница: 95 / 155

ADTECH 4 series CNC System (maintainance Manual)
91
038 X pitch comp end pos(mm)
Y pitch comp end pos(mm)
Z pitch comp end pos(mm)
4 pitch comp end pos(mm)
B pitch comp end pos(mm)
C pitch comp end pos(mm)
001
002
003
Select SupMode
AlterSuperuserPasswor
Alter User Password
Unit : mm
Authority : Operation admin or higher
Default : 0
Effective time : instant
Note : when the pitch compensation is effective , set the compensation range.it
can be 0---100mm or 10 -- 120mm.or others , but the minimum
should be more than pitch compensate spacing.so the start point can
be 0 or other values
Range : -9999.999 ~ 9999.999
Unit : mm
Authority : Operation admin or higher
Default : 0
Effective time : instant
Note : when the pitch compensation is effective , set the compensation range.
it can be 0---100mm or 10 --- 120mm.or others , but the minimum
should be more than pitch compensate spacing.so the end point can be
any point
11.4 Management parameters (P3.)
Range : none
Unit : none
Authority : Super mode
Default : none
Effective time : instant
Note :
In this menu, type the password and press ‗Insert‘. If the password is
valid, the system will enter this user mode;
After entering, this menu will turn into ―XXX admin mode‖, indicating